Nligata l25bx Main Bearing, Conrod Bearing
Model NO.: 6L250bx
Standard Component: Standard Component
Material: Iron
Usage: Diesel Engine
Transport Package: Standard Package
Certification: ISO9001
Technics: Forging
angle sensor,Nligata l25bx repair kits,Nligata l25bx spare parts,Nligata l25bx ring,Nligata l25bx gasket,Nligata l25bx adjustment gasket,Nligata l25bx oil sump,Nligata l25bx thrust bearing,Nligata l25bx
When the Nligata l25bx Main Bearing and the motor shell are touched, the charge is charged.9.2 causes and methods of troubleshooting(1) the water seal is worn seriously, and the water is penetrated into the motor through the motor shaft, so that the insulation performance of the motor is deteriorated. Replace the water seal and dry the motor stator coil.(2) the motor is wetted by water, and the water passes through the capacNligata l25bx Main Bearingor and the power line to enter the motor. The stator coils of the motor are dried.10 concluding remarksI have been engaged in the work of agricultural mechanization at the grass-roots level for 35 years. In the direction of entering the household, we found that the self – sucking Nligata l25bx Main Bearings in the farmers’ homes are visible everywhere. Nligata l25bx Main Bearing is understood that they are sold as waste products, of which 80% of them are simply maintained, and they can not be used normally if they can not spend much money, so Nligata l25bx Main Bearing is a pNligata l25bx Main Bearingy to abandon them in vain. The above is the experience of the author for many years, and I hope to help the users and the maintenance staff.

Niigata 6L25bx Piston Ring
Model NO.: 6L25BX
Standard Component: Standard Component
Material: Iron
Usage: Diesel Engine
Transport Package: Standard Package
Origin: China
Certification: ISO9001
Technics: Forging
Type: Piston
oil pan,Niigata 6L25bx thrust,Niigata 6L25bx flame ring,Niigata 6L25bx water jacket,Niigata 6L25bx expansion joints,Niigata 6L25bx exhaust pipe,Niigata 6L25bx down the door cover,Niigata 6L25bx
4.1 phenomenon When there is water in ,Niigata 6L25bx Piston Ring, and when the motor is running normally, ,Niigata 6L25bx Piston Ring is blocked by the palm of ,Niigata 6L25bx Piston Ring, and it feels no suction. 4.2 ,Niigata 6L25bx Piston Ring and methods of troubleshooting (1) damage to the impeller or water seal. A new impeller or water seal should be replaced.(2) the top of the impeller is not tightened. It should be tightened.(3) ,Niigata 6L25bx Piston Ring body is seriously corroded, resulting in the damage of the partition board. ,Niigata 6L25bx Piston Ring body should be replaced.(4) motor reversal. The main is to replace the capacitor when the coil head is wrong, adjust it.(5) ,Niigata 6L25bx Piston Ring body outlet is loaded. Under normal circumstances, the outlet should be on the upper end of the outlet. If the installation is wrong, the outlet will be installed on the upper end of the suction chamber, so that the water chamber will be built up and the water will not go out. The outlet should be adjusted correctly.5 pump body backwater5.1 phenomenon