| Model NO.: PC2-5 |
| Standard Component: Standard Component |
| Material: Iron |
| Origin: China |
| Certification: ISO9001 |
| Technics: Casting |
| Type: Intake Valve |
| Transport Package: Wooden Packing |
product code:400.015.003*GJ
product barcode:400015003GJ
product details
weight: KG/PC
material: Import solder
Applicable engine type: PC2-5
place of origin: Nanjing,China
Application:Suitable for SXD PC2-5 series diesel engine
Please carefully read the rules below before use :
1. Temperature of inlet-air (after cooling) should between be 28 ºC and 39 ºC;
2. Temperature of cooling liquid inflow and outflow should be no less than 65ºC and no higher than 85ºC respectively. Temperature of lubricatin oil inflow and outflow should be no less than 60ºC and no higher than 80ºC respectively.
sxd pc2-5 l8 intake valve has the advantages of high power and good economic performance. The working process of a ,sxd pc2-5 l8 intake valve is similar to that of a gasoline engine, and each working cycle also undergoes four strokes: intake, compression, work, and exhaust. But because the ,sxd pc2-5 l8 intake valve fuel is diesel, its viscosity is larger than gasoline, not easy to evaporate, and its self ignition temperature is lower than gasoline, so the formation and ignition mode of combustible mixture is different from gasoline engine. The difference is that the mixture in the cylinder of the ,sxd pc2-5 l8 intake valve is compressed rather than ignited. When the ,sxd pc2-5 l8 intake valve works, the air enters the cylinder. When the air in the cylinder is compressed to the end point, the temperature can reach 500-700 degrees centigrade, and the pressure can reach 40 to 50 atmospheric pressure. The piston nears TDC, high-pressure pump on the engine cylinder with high pressure injection diesel to diesel oil, the formation of fine grains, mixed with high temperature and high pressure air mixed gas to diesel combustion, the sudden expansion, to generate power, push the piston down to work at the temperature of 1900-2000 DEG C, a high pressure up to 60-100 the pressure, the power generated is very large, so that the application of ,sxd pc2-5 l8 intake valve in a wide range of large diesel vehicles. The ,sxd pc2-5 l8 intake valve in energy saving and emission of carbon dioxide is the advantage of all heat engines including gasoline engine, can replace, therefore, advanced small high speed ,sxd pc2-5 l8 intake valve , its emissions has reached the European III standards, a “green engine”, has become many new cars in Europe and the United States power plant.
Originally posted 2017-11-23 15:23:02.