| BRANDS | DAIHATSU MODEL | Product Description | DRAWING NO. |
| DAIHATSU | DS-22 | FUEL OIL FILTER | FIG. 4-2-2 |
| DAIHATSU | DS-22 | FILTER, 20×PL3/1 | Y522043105Z |
| DAIHATSU | DS-22 | ELEMENT ASSEMBLY | Y522043105B |
| DAIHATSU | DS-22 | BLOCK (20X), FILTER | A245012270Z |
| DAIHATSU | DS-22 | FILTER BODY | Y522043105ZA |
| DAIHATSU | DS-22 | FILTER CASE | Y522043105ZC |
| DAIHATSU | DS-22 | PACKING | Y522043105ZD |
| DAIHATSU | DS-22 | SHAFT | Y522043105Z1 |
| DAIHATSU | DS-22 | SET BOLT | Y5220413105ZE |
| DAIHATSU | DS-22 | PACKING | Y522043105ZF |
| DAIHATSU | DS-22 | SPRING | Y522043105ZG |
| DAIHATSU | DS-22 | COCK | Y522043105Z2 |
| DAIHATSU | DS-22 | PACKING SEAT | Y522043105ZH |
| DAIHATSU | DS-22 | PACKING | Y522043105ZI |
| DAIHATSU | DS-22 | PACKING RETAINER | Y522043105Z3 |
| DAIHATSU | DS-22 | HANDLE | Y522043105Z4 |
| DAIHATSU | DS-22 | TAPER PIN | Y522043105ZJ |
| DAIHATSU | DS-22 | STOPPER | Y522043105ZK |
| DAIHATSU | DS-22 | SPRING | Y522043105ZL |
| DAIHATSU | DS-22 | STUD BOLT | Y522043105ZM |
| DAIHATSU | DS-22 | NUT | Y522043105ZN |
| DAIHATSU | DS-22 | PLUG, AIR VENT | Y522043105ZO |
| DAIHATSU | DS-22 | STUD BOLT | Y522043105ZP |
| DAIHATSU | DS-22 | SPRING WASHER | Y522043105ZQ |
| DAIHATSU | DS-22 | ELEMENT | Y522043105Z5 |
| DAIHATSU | DS-22 | PACKING | Y522043105ZT |
| DAIHATSU | DS-22 | NIPPLE | Y522043105ZU |
| DAIHATSU | DS-22 | SLEEVE NUT | Y522043105ZV |
| DAIHATSU | DS-22 | SLEEVE | Y522043105ZW |
| DAIHATSU | DS-22 | PACKING | Y522043105ZX |
| DAIHATSU | DS-22 | SOUCER | C006770100C |
| DAIHATSU | DS-22 | BRACKET, F.O. TILTER | E234300130A |
| DAIHATSU | DS-22 | BOLT, M12×1.75×22 | X200012022Z |
| DAIHATSU | DS-22 | BOLT, M10×1.5×75 | X200010075Z |
| DAIHATSU | DS-22 | BOLT, M10×1.5×90 | X200010090Z |
| DAIHATSU | DS-22 | BOLT, M12×1.75×28 | X200012028Z |
| DAIHATSU | DS-22 | GASKET (1), 30×60 | Z541103060Z |
| DAIHATSU | DS-22 | GASKET, 17 | Z565001700Z |
| DAIHATSU | DS-22 | HEX.PLUG,3/8 | X570003000Z |
| DAIHATSU | DS-22 | DRAIN COCK (2), 3/8 | Z580203000Z |
标签归档：DAIHATSU DSM22 auxiliary factory
Stock DAIHATSU DS 26 FUEL CONTROL DEVICE (FOR PROPULSION) Assembly|DAIHATSU DS 26 for Engine,
| BRANDS | DAIHATSU MODEL | Product Description | DRAWING NO. |
| DAIHATSU | DS-22 | FUEL CONTROL DEVICE (FOR PROPULSION) | FIG.3-9(B) |
| DAIHATSU | DS-22 | CONTROL ROD BEARING (1) | E221600010A |
| DAIHATSU | DS-22 | CONTROL ROD BEARING (2) (WITHOUT ENGINE STOPPING DEVICE) | E221600020B |
| DAIHATSU | DS-22 | CONTROL ROD BEARING (2) (WITH ENGINE STOPPING DEVICE) | E221600130B |
| DAIHATSU | DS-22 | F.O. CONTROL ROD | E221600050A |
| DAIHATSU | DS-22 | HOLDER. RETUREN SPRING | C103840180Z |
| DAIHATSU | DS-22 | PIN, RACK LINK (1) | C103840190Z |
| DAIHATSU | DS-22 | REAMER BOLT, 8×14 | E261600080A |
| DAIHATSU | DS-22 | RACK LEVER | C103860010Z |
| DAIHATSU | DS-22 | RCK LEVER CLUTCH | C103860020Z |
| DAIHATSU | DS-22 | PACK LINK | E221600140Z |
| DAIHATSU | DS-22 | RETURN SPRING | C103879860Z |
| DAIHATSU | DS-22 | BOLT, M8×1.25×30 | X200008030Z |
| DAIHATSU | DS-22 | BOLT, M12×1.75×25 (WITHOUT ENGINE STOPPING DEVICE) | X200012025Z |
| DAIHATSU | DS-22 | BOLT, M12×1.75×35 (WITH ENGINE STOPPING DEVICE) | X200012035Z |
| DAIHATSU | DS-22 | BOLT, M12×1.75×40 | X200012040Z |
| DAIHATSU | DS-22 | CASLTE NUT, M6×1.0 | X225006000Z |
| DAIHATSU | DS-22 | HEX. SET SCREW (1), M6×12 | X250106012Z |
| DAIHATSU | DS-22 | FLAT WASHER, 6 | Z300006000Z |
| DAIHATSU | DS-22 | SPRIT PIN, 1×20 | Z320001020Z |
| DAIHATSU | DS-22 | SPRIT PIN, 2×20 | Z320002020Z |
| DAIHATSU | DS-22 | STRAIGHT PIN, 6×20 (WITHOUT ENGINE STOPPING DEVICE) | Z335006020Z |
| DAIHATSU | DS-22 | STRAIGHT PIN, 6×20 (WITH ENGINE STOPPING DEVICE) | Z335006020Z |
| DAIHATSU | DS-22 | STRAIGHT PIN, 6×35 (WITH ENGINE STOPPING DEVICE) | Z335006035Z |
| DAIHATSU | DS-22 | LINK PIN | E224600070A |
| DAIHATSU | DS-22 | RETAINER, GOVERNOR LINK (1) | E224600090Z |
| DAIHATSU | DS-22 | GOVERNOR ROD (1) | E224600120Z |
| DAIHATSU | DS-22 | BOLT, RACK STOPPED | C104540150Z |
| DAIHATSU | DS-22 | LEVER (2), F.O. CONTROL ROD | E224600190A |
| DAIHATSU | DS-22 | GOVERNOR LEVER | E224600250Z |
| DAIHATSU | DS-22 | GOVERNOR ROD (2) | E224600280Z |
| DAIHATSU | DS-22 | SPRING | E224600320Z |
| DAIHATSU | DS-22 | MOUNT, RACK STOPPER | E224600350A |
| DAIHATSU | DS-22 | BOLT, M8×1.25×20 | X200008020Z |
| DAIHATSU | DS-22 | BOLT, M10×1.5×32 | X200010032Z |
| DAIHATSU | DS-22 | NUT, M8×1.25 | X220008000Z |
| DAIHATSU | DS-22 | NUT (3), M10 | X222310000Z |
| DAIHATSU | DS-22 | CASTLE NUT (1), M8×1.25 | X225108000Z |
| DAIHATSU | DS-22 | FLAT WASHER, 10 | Z300010000Z |
| DAIHATSU | DS-22 | FLAT WASHER, 8 | Z300008000Z |
| DAIHATSU | DS-22 | SPLIT PIN, 2×20 | Z320002020Z |
| DAIHATSU | DS-22 | SPLING PIN, 4×24 | Z415004024Z |
| DAIHATSU | DS-22 | SPLING PIN, 4×30 | Z415004030Z |
| DAIHATSU | DS-22 | SPLING PIN, 2×14 | Z415002014Z |
| DAIHATSU | DS-22 | BOLT, M10×1.5×16 | X200010016Z |
| DAIHATSU | DS-22 | LOAD POINTER (1) | E233200010C |
| DAIHATSU | DS-22 | SCALE PLATE | E233200110Z |
| DAIHATSU | DS-22 | LEVER, LOAD POINTER | E273200120Z |
| DAIHATSU | DS-22 | BOLT, M10×1.5×25 | X200010025Z |
| DAIHATSU | DS-22 | BOLT, M6×1.0×10 | X200006010Z |
| DAIHATSU | DS-22 | NUT, M10×1.5 | X220010000Z |
| DAIHATSU | DS-22 | BOLT, M8×1.25×32 | X200008032Z |
| DAIHATSU | DS-22 | TOOTHED LOCK WASHER, M8 | Z315008000Z |
| DAIHATSU | DS-22 | +MACHINE SCREW, M4×0.7×10 | X245104010Z |
| DAIHATSU | DS-22 | NUT, M4×0.7 | X220004000Z |
Sale DAIHATSU DSM22 C.W. OUTLET COCK Assembly|DAIHATSU DSM22 China agent for accessories,
| BRANDS | DAIHATSU MODEL | Product Description | DRAWING NO. |
| DAIHATSU | DS-22 | C.W. OUTLET COCK | FIG.3-5-1 |
| DAIHATSU | DS-22 | C.W. OUTLET COCK ASSY. | E22611090Z |
| DAIHATSU | DS-22 | C.W. COCK BODY | E226100010Z |
| DAIHATSU | DS-22 | C.W. COCK | E226100040Z |
| DAIHATSU | DS-22 | COCK COVER | E226100070A |
| DAIHATSU | DS-22 | NUT, M12×1.75 | X220012000Z |
| DAIHATSU | DS-22 | GASKET (1), 34×70 | Z541103470Z |
| DAIHATSU | DS-22 | O RING, 32.5×3 | Z560003330Z |